Tuesday, March 17, 2020

Boat Slip Terminology and Use

Boat Slip Terminology and Use There are many terms for parts of a boat, the way a boat is operated, and the facilities used to store and service a boat. Wow, it’s a lot to learn and many of the people you encounter expect you to know all of these things. If you want to get a good start in the marine industry, a recreational facility is a great place to start. For the best chance of getting one of these jobs, you should know something about boat slips and dockage. An administrative person can fill a couple of sentences with enough terminology to confuse anyone who is more familiar with dry land than open waters. This can happen when you first start out your marine career adventure. It will also occur when you venture out to neighboring ports as you become more versatile. Of course, you know your own home base marina and slip configuration, but can you understand questions marina staff might ask while traveling? Is the slip appropriate for your needs? On which side will you tie up? What tying fixtures are present? What kind of improvements need to be made? Don’t worry it’s all fairly easy to understand. Dock Structure Large dock facilities are made up of one or more main docks connected to a face wall on shore. They come in two types, fixed and floating. Floating docks are usually connected to shore with hinged ramps which allow the docks to rise and fall with tides or changing water levels. Fixed docks are firmly attached to the shore and to support structures that are anchored underwater. The main docks project out from the face wall and each main dock hosts many smaller and narrower docks called finger piers. These finger piers divide the slip areas and provide a way to walk from the boat to the main dock. At the end of each finger pier and along the main dock are tall posts called piles. One or two extra piles also divide the area between two finger piers. These piles are only for tying, they dont carry a finger pier. Rarely, a slip will have a finger pier on each side of the slip space, but most facilities use the more efficient single side variety. Tying up the Boat Those two middle piles and the finger piers, with their piles, form a rectangle. This is the space where your boat should remain under all conditions. To assure it stays in position, it needs to be tied properly. There will be a few different places to tie the four standard dock lines, plus some tying fixtures for extra lines needed in windy or stormy conditions. A boat is very secure when all eight lines are properly rigged and tied. The names of the lines describe their position and function. The port and starboard bowlines connect to large loose rings at the front corners of the rectangle. The port and starboard stern lines connect to the outer pile and the pile at the end of the finger pier. This is secure, but the boat will still twist side to side and could strike the stern against the pier of pile in strong winds. To eliminate the twist, spring lines are attached to the stern cleats and either run forward and tied to the cleat in the middle of the finger pier, or all the way forward to the rings where the bowlines are tied. This process can be repeated with spring lines from the bow in the most extreme weather. Bumpers and other padding can customize a dock to protect a specific boat. Sometimes large rollers are added to guide boats into slips where space is tight. The classic mariners book The Ashley Book of Knots is still in print and makes a great addition to any bookshelf for the history lessons alone, and you will learn many knots and splices as well. Away From Home Port If you are traveling and visit a marina, you can rent a transient slip. A transient slip is one that is rented regularly or it may be a slip which is vacant for a week because the regular tenant is also out traveling. Most marinas have a provision which allows them to rent any slip which is going to be vacant for more than a couple of days. If you find yourself putting another boater in someone’s regular slip be sure and leave it as it was found. Once a boater requests a slip to fit the length and beam of the boat, as well as the amount of time needed, you should record the information. Then let the boater know the number and location of the slip and whether it is a port or starboard side tie up. This means that the finger pier will either be located on the port or starboard side. This is where someone can secure the boat while setting up other temporary lines. The finger pier will have cleats which are shaped like a short and wide capital letter T. There are usually three or four with one on each end of the pier and at least one in the middle. On fixed construction docks it’s okay to just tie up to the finger pier unless the weather is very bad. If bad weather strikes you will need to move the boat away from the pier to avoid damage from rubbing. Temporary dock lines are just like your permanent lines on a sailors home dock but the lengths will be different so four lines half the length of your boat, and four lines the length of your boat should be in every boat inventory. Having a few extras around is a good idea in case one is lost, damaged, or left behind by the visitor. Shore Power Ratings Shore power comes in two sizes, one for regular boats and one for very large boats with lots of power requirements. A twenty-amp connection is equivalent to one standard 120-volt household outlet.  For boats with full-size galleys or combination heating and air conditioning units, you will need a 240 volt, fifty amp connection, and appropriate power cord. Not all slips have both options so be sure to find out what power option is needed. Its also a good idea to know how someone might describe the plug configuration if they dont know the rating. Source Ashley, Clifford W. The Ashley Book of Knots. 1st edition, Doubleday Company, 1993.

Sunday, March 1, 2020

How to Use the Spanish Pronoun Se

How to Use the Spanish Pronoun 'Se' Se is undoubtedly the most versatile of the Spanish pronouns. As you learn Spanish, you will come across se used in a variety of ways, usually meaning one of the -self words of English such as herself or yourself.   Using Se as a Reflexive Pronoun The most common use of se is a reflexive pronoun. Such pronouns indicate that the subject of a verb is also its object. In English, this is usually accomplished by using verbs such as himself or themselves. ​Se is used as the reflexive pronoun for third-person uses (including when usted or ustedes is the subject). Some verbs (as in the final two examples below) can be used reflexively in Spanish even though they arent translated that way in English. Pablo se ve por el espejo. (Pablo sees himself using the mirror.)Los padres no pueden oà ­rse. (The parents cant hear themselves.)Rebecca se perjudica por fumar. (Rebecca is hurting herself by smoking.)Benjamà ­n Franklin se levantaba temprano. (Benjamin Franklin got up early.)Se comià ³ los tacos. (He ate up the tacos.) Using Se as the Equivalent of the Passive Voice Although this use of se isnt technically the passive voice, it fulfills the same function. By using se, particularly when discussing inanimate objects, it is possible to indicate an action without indicating who performed the action. Grammatically, such sentences are structured in the same way that sentences using reflexive verbs are. Thus in a literal sense, a sentence such as se venden coches means cars sell themselves. In actuality, however, such a sentence would be the English equivalent of cars are sold or, more loosely translated, cars for sale. Se abren las puertas. (The doors are opened.)Se vendià ³ la computadora. (The computer was sold.)Se perdieron los llaves. (The keys were lost.)Se prohibe fumar. (Smoking is prohibited.) Using Se as a Substitute for Le or Les When the indirect-object pronoun le or les is immediately followed by another pronoun that begins with an l, the le or les is changed to se. This prevents having two pronouns in a row beginning with the l sound. Dà ©selo a ella. (Give it to her.)Se lo dijo a à ©l. (He told it to him.)No se lo voy a dar a ellos. (Im not going to give it to them.) Using the Impersonal Se Se is sometimes used in an impersonal sense with singular verbs to indicate that people in general, or no person in particular, perform  the action. When se is used in this way, the sentence follows the same pattern as those in which the main verb is used reflexively, except that there is no subject to the sentence that is explicitly stated. As the examples below show, there are a variety of ways such sentences can be translated to English. Se maneja rpidamente en Lima. (People drive fast in Lima.)Se puede encontrar cocos en el mercado. (You can find coconuts in the market.)Muchas veces se tiene que estudiar para aprender. (Often you have to study to learn.)No se debe comer con prisa. (One ought not to eat quickly.) A Caution About a Homonym Se shouldnt be confused with sà © (note the accent mark), which is usually the singular first-person present indicative form of saber (to know). Thus sà © usually means I know. Sà © can also be the singular familiar imperative form of ser; in that case it means you be as a command.